Owner's manual

Operating Your Video Matrix Switcher
19
19
7 Operating Your Video Matrix Switcher
This section describes:
• The startup display (see
Section 7.1
• Using the selector buttons (see
)
Section 7.2
• Confirming actions (see
)
Section 7.3
• Switching options (see
)
Section 7.4
• Locking the front panel (see
)
Section 7.5
7.1 Startup Display
)
After switching on the power, the LCD display
1
shows the following screens in
sequence.
Figure 11: Default Startup Status Display Sequence
The VS-1616D does not have separate output and input buttons. Instead, the front
panel includes a numeric keypad within the Selector Buttons area
2
. This numeric
keypad lets you enter both the output and input numbers as well as various numeric
configuration values (see
Section 7.2
When the unit is powered-on, the last matrix setup that was used is loaded. Use
either the setup
).
3
recall (see Section 8.1.6) or default setup recall
4
7.4.5
(see
Section ) functions to retrieve other setups.
1 The text in the LCD Display may vary (according to machine settings)
2 See
Table 1
3 Records a stored configuration from a preset
4 For quick retrieval, you can program a default setup that is commonly used