Owner's manual

Connecting the VS-1616D 16x16 Digital Matrix Switcher

4. Connect the power cord

5. If necessary, review and set the system configuration using the Menu (see

Section 8

Note: Given an input signal that is HDCP encoded, the VS-1616D will output a

signal only if the output port to which it is switched supports HDCP.

6.1 Port Numbering

Figure 5: Sample Port Numbering

Table 4: Port Numbering

Diagram # Actual Port Number Diagram # Actual Port Number

1 IN 1 6 OUT 2

2 IN 2 7 OUT 1

3 IN 3 8 OUT 3

4 IN 5 9 OUT 5

5 IN 6 10 OUT 6

Note: There is no IN 4 or OUT 4 because these slots contain DVI dual link cards.

1 We recommend that you use only the power cord that is supplied with the device (not shown in Figure 4)