Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-1616D 16x16 Digital Matrix Switcher
12
6 Connecting the VS-1616D 16x16 Digital Matrix Switcher
The configuration of DVI input/output cards shown in Figure 4 is merely an
sample representation and different I/O cards may be mixed as required (for
limitations, see
Page 13 ). Exactly the same principles apply to installations using
other card types.
Figure 4: Connecting the VS-1616D
To install
1
the VS-1616D as illustrated in the example in Figure 4:
1. Connect up to 16 DVI video sources (for example
2
2. Connect up to 16 DVI video acceptors, (for example
, computer graphics
sources).
2
, a plasma display and a
DVI LCD display).
3. If required, connect a PC or remote controller to the RS-232 port (see
Section 6.4) and/or the Ethernet port (see 6.5Section
1 Switch off the power for each device before connecting it to your VS-1616D
).
2 In this example only two inputs and two outputs are connected