K R A ME R E LE CT R O N IC S L T D .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.1 Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Defining the VS-12DPIR 1x2 DisplayPort Selector 2 2 3 3 4 4 4 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview The high-quality VS-12DPIR accepts a DisplayPort (DP) input and distributes the signal to one of two selectable outputs. In particular, the VS-12DPIR features: • Up to 2.7Gbps bandwidth per graphic channel • A maximum resolution of 2560x1600 pixels and a total maximum bandwidth of 10.8Gbps over four lanes • A high-resolution, and rich colors, and transports audio and multiple video streams 3.
Figure 1: VS-12DPIR 1x2 DisplayPort Selector # Feature Function 1 INPUT DisplayPort Connector Connects to the DP source 2 OUT 1 DisplayPort Connector Connects to the DP acceptor 1 3 OUT 2 DisplayPort Connector Connects to the DP acceptor 2 4 REMOTE Terminal Block Connectors Connect to a contact closure switch 5 5V DC +5V DC connector for powering the unit 6 REMOTE IR Receiver Window Receives signals from the infrared remote control transmitter 7 REMOTE IR LED The red LED lights when r
4 Connecting the VS-12DPIR i Always switch off the power to each device before connecting it to your VS-12DPIR. After connecting your VS-12DPIR, connect its power and then switch on the power to each device. To connect the VS-12DPIR, as the example in Figure 2 shows, do the following: 1. Connect the DP source (for example, a PC with a DP output) to the INPUT DP connector. 2.
4.1 Controlling via the REMOTE Terminal Block Connector The contact closure remote control pins operate in a similar way to the output SELECT button. Using the contact closure remote control lets you select an output by remote control. To do so, temporarily connect the required input (OUT1 or OUT2) pin on the REMOTE terminal block connector to the G (ground) pin, as illustrated in the examples in Figure 3.
5 Technical Specifications INPUT: 1 DisplayPort connector OUTPUTS: 2 DisplayPort connectors BANDWIDTH: Supports up to 2.7Gbps bandwidth per graphic channel COMPLIANCE WITH HDMI STANDARD: Supports: DisplayPort 1.1 and HDCP 1.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
