User's Manual

16 VP-81K - Connecting the VP-81K
To control the VP-81K via the embedded Web page, make sure that it is
connected to the Ethernet port of your computer and do the following:
1. Open your Internet browser.
2. Type the unit’s IP number in the Address bar of your browser:
The default IP number is 192.168.1.39, and may be changed by the system integrator.
A Warning-Security screen appears:
3. Click Run.
The VP-81K front panel is displayed on your screen (see Figure 12
).
Figure 12: HOME Embedded Web Page
4. Click the on-screen buttons to control the unit.