User's Manual

14 VP-81K - Connecting the VP-81K
5.4.2 Connecting via a Straight-Through Cable
You can connect the Ethernet of the VP-81K to the Ethernet port on a network hub
or network router, via a straight-through cable with RJ-45 connectors.
5.4.3 Configuring the Ethernet Port
To configure the Ethernet port, download the P3K Wizard Ethernet configuration
software. Extract the file to a folder and create a shortcut on your desktop to the file.
Follow these steps to configure the port:
1. Double click the desktop icon.
The Connect screen appears as follows:
Figure 10: Connect Screen
2. Select the method to connect to the Ethernet port of the VP-81K.
Select:
 Ethernet, if you know the IP address number or the machine name.
The default name for the machine is KRAMER_XXXX.
The four digits are the last four digits of the machine’s serial number.
 Serial, if you are connected via a serial port
192 . 168. 1 . 39
50000