User Manual

VP-747 - Operating the VP-747 27
8 Operating the VP-747
You can operate the VP-747 via the:
• OSD Menu, see
• LCD Display, see
Section 8.1
• Infrared Remote Control Transmitter, see
Section 8.2
• Ethernet/RS-232, see
Section 8.3
8.1 Operating via the OSD MENU Screen
Section 8.4
The OSD superimposes a menu on the Preview screen from which you can control
your VP-747. When the OSD front panel button is on, pressing the MENU button
on the front panel or the Menu key on the infrared remote control transmitter
displays the first OSD screen (or the last used OSD screen), the “Preview Setting”
screen. If the OSD is off, pressing the MENU button on the front panel or the Menu
key on the infrared remote control transmitter does not display the “Menu screen”.
In this case, you can navigate via the front panel LCD.
Figure 11 defines the six interactive icons:
Figure 11: Menu Screen Icons