User Guide

Kramer Electronics Ltd.
10
SE6 Sharpness
MI! [-] minus MI0 If excess minimum value
PL! [+] plus PL0 If excess maximum value
AL!
ALL
AU?
OU?
SE?
IN?
LO1
Return all video scaler status
________________________
if INPUT system locked
under AUTO mode
RE! RESET none
none RE1 video scaler reset
none LO0 INPUT system unlocked
under AUTO mode
none LO1 INPUT system locked under
AUTO mode or change to
non-AUTO mode
11 TECHNICAL DATA
11.1 HD15 Connector Information
Pin Use Pin Use
1 Red 0.7v max. / 75 Ohms 9 Passed to PC monitor pin 9
2 Green 0.7v max. / 75 Ohms 10 Ground
3 Blue 0.7v max. / 75 Ohms 11 Ground
4 ID 2, passed to PC monitor pin 4 12 ID 1, passed to PC monitor pin 12
5 Ground 13 Horizontal Sync TTL
6 Red ground 14 Vertical Sync TTL
7 Green ground 15 Passed to PC monitor pin 15
8 Blue ground
11.2 Fuse Replacement
The Video Scaler’s AC fuse is located next to the On/Off Switch on the rear panel and is easily accessible. If
fuse replacement is necessary, be sure to use the same type and size as the original.