Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-72 Multiformat 1:2 Distribution Amplifier
2
device, simultaneously. The VP-72 can be used as a 7 input 1:2 DA for all
distribution applications. In particular, the VP-72:
 Includes two 1:2 composite video distribution amplifiers on BNC
connectors, two 1:2 Y/C distribution amplifiers on 4p connectors, two 1:2
VGA distribution amplifiers on HD15 connectors, and one 1:2 YUV
distribution amplifier on BNC connectors
 Includes Gain
1
and EQ., control, as well as ID Bit control
 Has video bandwidth exceeding 400MHz, ensuring that it remains
transparent in almost any application
 Is housed in a 19-inch rack mountable enclosure requiring one vertical
rack space and is fed from any 100-240VAC, 50/60Hz mains supply
Achieving the best performance means:
 Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
 Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your VP-72 unit in a
location free from moisture and away from excessive sunlight and dust
4 Your VP-72 Multiformat 1:2 Distribution Amplifier
This section defines the front panel (see section 4.1), the rear panel (see
section 4.2), and the underside (see section 4.3).
4.1 VP-72 Multiformat 1:2 Distribution Amplifier Front Panel
Figure 1 and Table 1 define the VP-72 front panel:
Figure 1: Front Panel VP-72 Multiformat 1:2 Distribution Amplifier
Table 1: Front Panel VP-72 Multiformat 1:2 Distribution Amplifier Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
1 s-Video controls include separate Y (Luma), C (Chroma) and EQ., control