User Guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

9 Technical Specifications

Table 20 includes the technical specifications:

Table 20: Technical Specifications

of the Presentation Switchers / Scalers

INPUTS:

2 x CV 1 Vpp/75  on RCA connectors;

2 x Y/C (s-Video) 1 Vpp (Y), 0.3Vpp (C) / 75  on 4 pin connectors; 1 x Component

(Y, Pb/Cb, Pr/Cr) (both progressive and interlaced signals accepted) HDTV on RCA

connectors;

1 x VGA (VGA/SVGA/XGA/UXGA +HDTV on an HD15F connector (2 x VGA on the

VP-724xl); and 1x DVI-D connector.

For each video input there is a corresponding (unbalanced) audio stereo input on a

terminal block connector

MAX. OUTPUT LEVEL: AUDIO: 4.88Vpp

OUTPUTS: 2 x RGBHV (VGA) format on HD15 connectors; component HDTV on the same

HD15 connectors for 480p, 720p and 1080i (on the VP-724xl). One line-level stereo

audio on terminal blocks. One stereo loudspeakers output 2x5W (RMS) on terminal

blocks

OUTPUT

RESOLUTIONS:

VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA

(1600x1200), 1024x852, 1024x1024, 1366x768, 1365x1024, 1280x720, 720x483,

852x480, 1400x1050, 1280x768*, as well as a user definable output mode. Also

supports 480p, 720p, and 1080i (on the VP-724xl)

CONTROL: Front panel buttons / OSD, IR remote control, RS-232 on a DB-9 connector, Picture-

In-Picture (not available on the VP-719xl): Video in Graphics (or vice versa) in any

size and at any location, or Split Screen (2 images side-by-side)

ADDITIONAL

CONTROLS:

Freeze, zoom, different selectable vertical refresh rates, Video and Audio

ProcAmp control, output image scaling and aspect ratio change

POWER SOURCE: 100-240 VAC, 50/60 Hz, 30VA automatic power supply

DIMENSIONS: 19" (W), 9.3" (D) 1U (H) rack mountable

WEIGHT: 3 kg (6.6 lbs.) approx.

ACCESSORIES: Null modem adapter, IR remote control, power cord

1 Specifications are subject to change without notice

2 With maximum amplification (volume set to maximum), AUDIO IN maximum is 1.9Vpp, and the AUDIO OUT maximum

is 4.8Vpp

3 We recommend that you use only the power cord that is supplied with this machine