User Guide

Configuring the VP-724xl via the OSD MENU Screens
31
8.4.2.2 Adjusting the Zoom Position
You can adjust the zoom position via one or more of the following methods:
 Using the preset position control
keys (see Figure 28) on the infra-red
remote control transmitter (see
Figure 16), which instantly move
the position of the zoom to up to
nine preset fixed locations
1
Figure 28: Preset Position Control Keys
 Using the navigation control keys
on the infra-red remote control
transmitter (see Figure 16), to fine
tune the zoom position (that is, to
slowly zoom-in at any location on
the screen)
2
, as Figure 29 illustrates
Figure 29: Navigation Control Keys
 Using the OSD Menu buttons (see Figure 30)
3
Figure 30: Geometry (Zoom Position Adjustment) Screen
1 For example, to zoom-in to the lower right corner of the image, press the button
2 For example, to zoom-in toward the lower right of the image, press the and the buttons separately, as required
3 For example, to zoom-in to the lower right part of the image instead of the top left part, press the + and DOWN OSD Menu
buttons on the front panel separately, as required