Kramer Electronics, Ltd.
Contents Contents 1 2 3 3.1 3.2 4 4.1 4.2 5 6 6.1 6.
Introduction 1 Introduction Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in 8 Groups1, which are clearly defined by function.
Overview 3 Overview Section 3.1 and section 3.2 describe the VP-2xl and VP-6xlN, respectively. 3.1 About the VP-2xl The VP-2xl 1:2 VGA Distributor is a high performance, desktop size, distribution amplifier for computer graphics signals, with resolutions ranging up to at least UXGA, and unbalanced stereo audio signals. It takes one computer graphics input, and an unbalanced stereo audio input, and outputs two computer graphics and two unbalanced stereo audio signals.
Your Distributors 4.
Your Distributors Figure 2: VP-6xlN 1:6 UXGA Distributor – Front and Rear View 4 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Distributors Table 2: Features and Functions of the VP-6xlN 1:6 UXGA Distributor # Feature POWER Switch UXGA EQ. Trimmer UXGA INPUT HD15F Connector UXGA OUT HD15F Connectors Power Connector with FUSE 1 2 3 4 5 Function Illuminated switch for turning the unit ON or OFF 1 Adjusts the video EQ.
Installing on a Rack 5 Installing on a Rack This section describes what to do before installing the VP-6xlN on a rack and how to rack mount. To rack-mount the VP-2xl, see the Rack Adapters user manual for detailed instructions. Before Installing on a Rack Before installing on a rack, be sure that the environment is within the recommended range: Operating temperature range +5 to +45 Deg. Centigrade Operating humidity range 5 to 65 % RHL, non-condensing Storage temperature range -20 to +70 Deg.
Connecting the Distributors 6 Connecting the Distributors The following sections describe how to connect the: VP-2xl 1:2 VGA Distributor (see section 6.1) VP-6xlN 1:6 UXGA Distributor (see section 6.2) 6.1 Connecting the VP-2xl To connect the VP-2xl, as the example in Figure 4 illustrates: 1. Connect a computer graphics source (for example, a computer) to the INPUT HD15F connector and to the R and L AUDIO IN RCA connectors. 2.
Connecting the Distributors 6.2 Connecting the VP-6xlN To connect the VP-6xlN, as the example in Figure 5 illustrates: 1. Connect a computer graphics source (for example, a computer) to the UXGA INPUT HD15F connector. 2. Connect the UXGA OUTPUT HD15F connectors to up to1 six acceptors (for example, display 1 to display 6). 3. Connect the power cord2 (not shown in this illustration). 4. Adjust3 the UXGA EQ. cable compensation equalization level, if required. 5.
Technical Specifications 7 Technical Specifications 1 Table 4: Technical Specifications of the VP-2xl 1:2 VGA Distributor INPUTS: OUTPUTS: BANDWIDTH: DIFF. GAIN: DIFF.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
