User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VP-502xl

5 Your VP-502xl

Figure 2 and Table 2 describe the VP-502xl.

Figure 2: VP-502xl UXGA/HD Scan Converter

Table 2: VP-502xl Features

Feature

Function

1 12V DC +12V DC connector for powering the unit

2 Y/C OUT 4-pin Connector Connect to the s-Video acceptor

3 CV OUT BNC Connector Connect to the composite video acceptor

4 YUV, PAL DIP-switches

Select the video standard (OFF for PAL, ON for NTSC) and the

color space (OFF for YUV, ON for RGB) (see section

8.6)

5 INPUT 15-pin HD Connector Connect to the computer graphics or HD source

6 OS LED Lights when the image is over-scanned

FREEZE. LED Lights When the FREEZE button is pressed

8 MENU Button Press to enter the menu and adjust the Scan Converter features

ENTER / AUTO IMAGE

Button

Press ENTER to accept settings; press AUTO IMAGE to acquire

optimal screen display

10 - / FREEZE Button

Press - to scroll down the menu; press FREEZE to freeze video

image and features. Press again to disable

11 + / OS/US Button

Press + to scroll up the menu; press OS/US to toggle between

over-scan3 and under-scan

1 The displayed image, when set correctly, is larger than the screen

2 This button has dual functionality. When in the MENU mode, it functions according to the labeling above the button. When

not in the MENU mode, the labeling below the button takes precedence

3 The image is smaller than the screen, leaving a border around the image