User manual

Your VP-501xl
3
4 Your VP-501xl
Figure 1 and Table 1 describe the VP-501xl.
Figure 1: VP-501xl UXGA Scan Converter
Table 1: VP-501xl Features
#
Feature
Function
1 12V DC +12V DC connector for powering the unit
2 Y/C OUT 4-pin Connector Connect to the s-Video acceptor
3 CV OUT BNC Connector Connect to the composite video acceptor
4 PAL DIP-switch Select the video standard (OFF for PAL, ON for NTSC) (see section 8.6)
5
INPUT 15-pin HD
Connector
Connect to the computer graphics source
6 OS LED Lights when the image is over-scanned
1
7 FREEZE. LED Lights when the FREEZE button is pressed
8 MENU Button Press to enter the menu and adjust the Scan Converter features
9
ENTER / AUTO IMAGE
Button
2
Press ENTER to accept the settings; press AUTO IMAGE to acquire optimal
screen display
10 - / FREEZE Button
2
Press - to scroll down the menu; press FREEZE to freeze the video image
and features. Press again to disable
11 + / OS/US Button
2
Press + to scroll up the menu; press OS/US to toggle between over-scan
1
and
under-scan
3
1 The displayed image, when set correctly, is larger than the screen
2 This button has dual functionality. When in the MENU mode, it functions according to the labeling above the button. When
not in the MENU mode, the labeling below the button takes precedence
3 The image is smaller than the screen, leaving a border around the image