User manual

VP-461 - Controlling the VP-461

7 Controlling the VP-461

The VP-461 can be controlled via:

 The front panel buttons (see Section 7.1)

 The OSD menu (see Section 7.2)

 The infrared remote control transmitter (see Section 7.4)

7.1 Controlling via the Front Panel Buttons

The VP-461 includes the following front panel buttons:

 Input selector buttons for selecting the required input: PC, HDMI and

DisplayPort (see Section 7.1.1)

 PIP and FREEZE buttons (note, these buttons illuminate when selected)

 MENU, ENTER (right arrow), left arrow and up, down, arrow buttons

 Output Volume up (+) and down (-) buttons (when not in the OSD mode)

 RESET TO 720p/XGA and PANEL LOCK buttons

7.1.1 Using the INPUT Front Panel buttons

When selected, an INPUT front panel button behaves as follows:

Selecting the:

Causes the button to:

Main input button

Illuminate continuously

PiP input button

Blink (the light On period is shorter than the light Off period)

Same Main input button and

PiP button

Blink (the light On period is longer than the light Off period)

If you want to adjust the image of a selected input in a window, press

that input button again (up to 3 times) for fast tuning. Pressing that

input button for the fourth time initiates full tuning of the window.

7.2 Controlling via the OSD Menu

You can change PiP Window parameters, main window parameters and entire

system parameters via the OSD menu, as described in Section 5.