User manual

VP-461 - The OSD Menu

5.8 The Miscellaneous Menu

Figure 19: Misc Menu

Setting

Function

Information

Displays the input resolution and frequency, the output resolution and

firmware versions E

If the selected output is the native output resolution, it will be displayed under

"Native Output:"; in case of an explicit output resolution the title will be "Output:"

If the input video is encrypted, an HDCP icon appears next to the input

information

OSD

Set:

Window Control – to Main Window Control to set the OSD menu to control

the Main window (letting you select the input and other parameters for the

main window) or to PiP Window Control to control the PiP window (letting

you select the input and other parameters for the PiP window) E

While browsing the OSD menu in the dual window mode, the window

control can be toggled instantly with a long press of the PIP button on the

front panel and a short press of the PIP button on the IR remote controller.

Note that you can select the window control only when in the dual window mode

H Position – to set the horizontal position of the OSD E

V Position – to set the vertical position of the OSD E

Transparency – to set the transparency to On or Off E

Transparency Gain – to set the transparency level (once set to

transparent) E

Transparency Bias – to set the transparency level E

Blink – to On for the selected item in the OSD to blink, or Off E

Blink Period – to determine the blinking rate E

Timeout – to 30 seconds before OSD timeout, 60 seconds before OSD

timeout or OFF (Off means that that the OSD appears continuously) E