User manual

VP-461 - The OSD Menu

Note that:

 A selected parameter that turns gray becomes valid immediately (there is no

need to press Enter to save the changes)

 Exiting the menu saves the parameter to the memory

 Data is saved per window and per input (to a dedicated input + window

memory), as applicable

The control buttons let you control the VP-461 via the OSD menu. Press the:

 MENU button to enter the menu, exit the menu, and when in the OSD menu,

move to the previous level and change menu settings in the OSD screen.

Changes are immediate

The default timeout is set to 30 seconds and can be changed (see Section 5.8)

 ENTER (or ) button to access sub-menu items

 Arrow buttons to move through the OSD menu

 Up or down arrows to change settings

Note that when exiting menu, all the changes are automatically

saved to the non-volatile memory.

The default OSD timeout is set to 30 seconds and can be changed

(see Section 5.8).

5.1.1 OSD Control Icons

The following three icons: M, P, and E are included to indicate when functionality

applies to the Main window, the PiP Window or the entire system:

 M for Main Window Control

 P for PiP window Control

 E for Entire System Control