User manual

VP-461 - Overview
7
7
#
Feature
Function
1
IR Receiver
Accepts IR remote commands
2
IR LED
Lights orange when the unit accepts IR remote
commands
3
INPUT
SELECT
Buttons
PC 15-pin HD
Press to select the computer graphics input
4
HDMI
Press to select the HDMI input
5
DISPLAYPORT
Press to select the DisplayPort input
6
PIP Button
Toggles the dual window mode (Picture-in-Picture)
function (see Section 6.2)
Note that while browsing the OSD menu in the dual
window mode, a long press of the PIP button will
instantly toggle the window control (between Main and
PiP)
7
FREEZE Button
Press to freeze/unfreeze the output video image
8
Navigation
Buttons
/-
VOLUME
Button
Press to move down the menu list (see Section 7.1.1)
and to decrease numerical values. When not within the
OSD menu mode, press to reduce the output volume
9
 Button
Press to exit the OSD menu and, when in the OSD
menu, move to the previous level in the OSD screen
(see Section 7.1.1)
10
/+ VOLUME
Button
Press to move up the menu list values (see Section
7.1.1) and to increase numerical values. When not
within the OSD menu mode, press to increase the
output volume
11
 ENTER
Button
Press to access sub-menu items and select from
several settings (see Section 7.1.1)
12
MENU Button
Press to access/exit the menu
13
RESET TO 720P/XGA
Button
Press to reset the video output resolution to XGA or
720p and change the deep color settings to Off (see
Section 5.7)
Press and hold for about 3 seconds to toggle between reset
to XGA and reset to 720p
14
PANEL LOCK Button
Press and hold for about 3 seconds to lock/unlock the
front panel buttons
15
AUDIO PC IN 3.5mm Mini
Jack Connector
Connect to the unbalanced audio of the computer
graphics source (the pinout is defined in Section 4.1)
16
AUDIO OUT 3.5mm Mini
Jack Connector
Connect to an unbalanced stereo audio output
17
VIDEO
INPUT
Connectors
PC
Connect to the computer graphics source
18
HDMI
Connect to the HDMI source
19
DISPLAYPORT
Connect to the DisplayPort source
20
VIDEO
OUTPUT
Connectors
PC 15-pin HD
Connect to a computer graphics acceptor
21
HDMI
Connect to an HDMI acceptor
22
RS-232 9-pin D-sub Port
Connect to the PC or a remote controller
23
5V DC
+5V DC connector for powering the unit