K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview 2 2 3 3 4 4 4.1 4.2 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview The Kramer TOOLS VP-200K, VP-300K and VP-400K are 1:2, 1:3 and 1:4 (respectively) distribution amplifiers for UXGA and higher resolution signals. The VP-200K, VP-300K and VP-400K accept one input, provide correct buffering and isolation, and then distribute the signal to two, three or four (respectively) identical outputs on high-density 15-pin HD connectors.
4 Your High Resolution XGA DA This section defines the: 4.1 VP-200K 1:2 High Resolution UXGA DA (see section 4.1) VP-300K 1:3 High Resolution UXGA DA (see section 4.2) VP-200K 1:4 High Resolution UXGA DA (see section 4.
4.
4.
5 Connecting the VP-300K i Always switch off the power to each device before connecting it to your product. After connecting your product, connect its power and then switch on the power to each device. To connect the VP-300K as illustrated in the example in Figure 4: 1. Connect a computer graphics source to the INPUT 15-pin HD connector. 2.
Figure 4: Connecting the VP-300K High Resolution UXGA DA VP-200K, VP-300K, VP-400K - Connecting the VP-300K 9
6 Technical Specifications INPUT: 1 UXGA on an 15-pin HD connector OUTPUTS: 2/3/4 UXGA on 15-pin HD connectors MAX. OUTPUT LEVEL: 2.2Vpp BANDWIDTH (-3dB): 400MHz DIFF. GAIN: 0.03% DIFF. PHASE: 0.03Deg K-FACTOR: <0.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
