KR AMER ELECTRON ICS LT D.
Contents 1 Introduction 1 2 2.1 Getting Started Achieving the Best Performance 2 2 3 3.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high performance high resolution cables Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate). i 2.
3 Overview The Kramer MultiTOOLS™ VP-2K is a high-performance distribution amplifier for computer graphics signals, with resolutions exceeding UXGA, and unbalanced stereo audio signals. It accepts one computer graphics input, and an unbalanced stereo audio input, and outputs two computer graphics and two unbalanced stereo audio signals.
Figure 1: VP-2K 1:2 UXGA/Audio Distributor # Feature 1 ON LED 2 AUDIO LEVEL Control Function Illuminates when the unit is powered ON Adjust the output audio level, if required Rotate all level and EQ controls with a small screwdriver 4 3 UXGA LEVEL Control Adjust the UXGA output level, if required 4 UXGA EQ. Control Adjust the EQ. (equalization) compensation level, if required 5 SYNC PROC.
4 Installing in a Rack This section provides instructions for rack mounting the unit.
5 Connecting the VP-2K i Always switch off the power to each device before connecting it to your VP-2K. After connecting your VP-2K, connect its power and then switch on the power to each device. To connect the VP-2K as illustrated in the example in Figure 2: 1. Connect a computer graphics source to the UXGA IN 15-pin HD (F) connector and to the R and L AUDIO IN RCA connectors. 2.
Figure 2: Connecting the VP-2K 1:2 UXGA/Audio Distributor VP-2K - Connecting the VP-2K 7
6 Technical Specifications INPUTS: Video: 1 UXGA on a 15−pin HD (F) connector; Audio: 1 audio stereo on RCA connectors OUTPUTS: Video: 2 UXGA on 15−pin HD (F) connectors; Audio: 2 audio stereo on RCA connectors MAX. OUTPUT LEVEL: Video: 2.2Vpp; Audio: 6.8Vpp BANDWIDTH (–3dB): Video: 380MHz; Audio: >100kHz DIFF. GAIN: 0.03% DIFF. PHASE: 0.03Deg K-FACTOR: <0.05% S/N RATIO: Video: 73dB; Audio: 89dB CONTROLS: UXGA: Level: –1.1dB to 6.5dB; EQ.: 0dB to 5.3dB@50MHz; Audio Level: –50dB to 6.
! ! PN: 2900- 000490 " " Rev: 3
