Owner's manual

Your VM-50CA 1:5 Video Component / Audio Distributor
5
Table 1: VM-50CA 1:5 Video Component / Audio Distributor Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 Y RCA Connectors
3 Pb/Cb RCA Connectors Connect to the component video acceptors (from OUT 1 to OUT 5)
4
OUT
Pr/Cr RCA Connectors
5 Y RCA Connector
6 Pb/Cb RCA Connector Connect to the component video source
7
INPUT
Pr/Cr RCA Connector
8 LEFT Adjust
1
the left audio signal output level
9
LEVEL
Trimmer
RIGHT Adjust the right audio signal output level
10 R Connect to the right analog audio source
11
INPUT RCA
Connector
L Connect to the left analog audio source
12 R Connect to the right analog audio acceptors (from OUT 1 to OUT 5)
13
ANALOG AUDIO
OUT RCA
Connectors
L Connect to the left analog audio acceptors (from OUT 1 to OUT 5)
14 INPUT Connect to the digital audio source
15
S/PDIF RCA
Connectors
OUT Connect to the digital audio acceptors (from OUT 1 to OUT 5)
16 Power Connector with Fuse AC connector enabling power supply to the unit
The VM-50CA underside is illustrated in Figure 2 and defined in Table 2:
Figure 2: VM-50CA Underside View
Table 2: VM-50CA Underside View Features
# Feature Function
1 EQ. Trimmer Adjust
1
the Y cable compensation equalization level Y
LEVEL Trimmer Adjust
1
the Y output signal level
2 EQ. Trimmer Adjust
1
the Pb/Cb cable compensation equalization level Pb/Cb
LEVEL Trimmer Adjust
1
the Pb/Cb output signal level
3 EQ. Trimmer Adjust
1
the Pr/Cr cable compensation equalization level Pr/Cr
LEVEL Trimmer Adjust
1
the Pr/Cr output signal level
1 Insert a screwdriver into the small hole and carefully rotate it, to trim the appropriate level