Manual

VM-4Hxl - Connecting the VM-4Hxl 7
5 Connecting the VM-4Hxl
Always switch off the power to each device before connecting it to your
VM-4Hxl. After connecting your VM-4Hxl, connect its power and then
switch on the power to each device.
To connect the VM-4Hxl as illustrated in the example in
Figure 2:
1. Connect an HDMI source (for example, a DVD player) to the INPUT
connector.
2. Connect the four OUTPUT connectors to up to four HDMI acceptors (not all
outputs need to be connected) as follows:
 OUTPUT 1 connector to HDMI acceptor 1 (for example, an LCD TV)
 OUTPUT 2 connector to HDMI acceptor 2 (for example, a plasma
display)
 OUTPUT 3 connector to HDMI acceptor 3 (for example, a plasma
display)
 OUTPUT 4 connector to HDMI acceptor 4 (for example, a plasma
display)
3. Connect the power cord to the mains electricity.
4. Turn ON the POWER.
5. Acquire EDID (see Section
6).
i