Instruction Manual

6
VM-4HN - Connecting the VM-4HN
4 Connecting the VM-4HN
Always switch off the power to each device before connecting it to your
VM-4HN. After connecting your VM-4HN, connect its power and then
switch on the power to each device.
Connect the VM-4HN as illustrated in the example in Figure 2:
1. Connect an HDMI input source (for example, a DVD player) to the HDMI IN
connector.
2. Connect the four OUTPUT connectors to up to four HDMI acceptors, as
follows:
Not all outputs need to be connected.
 HDMI OUT 1 connector to HDMI acceptor 1 (for example, an LCD TV)
 HDMI OUT 2 connector to HDMI acceptor 2 (for example, plasma
display 1)
 HDMI OUT 3 connector to HDMI acceptor 3 (for example, plasma
display 2)
 HDMI OUT 4 connector to HDMI acceptor 4 (for example, plasma
display 3)
3. Connect the 5V DC power adapter to the power socket unit and then
connect the adapter to the mains electricity (not shown in Figure 2).
The ON LED lights.
i