User Manual

VM-2HD - Connecting the VM-2HD

4 Connecting the VM-2HD

Always switch off the power to each device before connecting it to your

VM-2HD. After connecting your VM-2HD, connect its power and then

switch on the power to each device.

To connect the VM-2HD as illustrated in the example in Figure 2:

1. Connect an HD-SDI/SD-SDI video source (for example, a camera) to the

INPUT BNC connector.

2. Connect up to two video OUT BNC connectors to the appropriate

HD-SDI/SD-SDI video acceptors (for example, displays).

You do not have to connect both outputs.

3. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in Figure 2).

Figure 2: Connecting the VM-2HD HD/SD-SDI DA