User manual
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-24HC 2 Input 1:4 HDMI Distributor
6
5 Using the VM-24HC 2 Input 1:4 HDMI Distributor
This section describes:
• Connecting the VM-24HC (see Section
5.1)
• Selecting an Active Input (see Section
5.2)
• Connecting a PC/Controller via RS-232 (see Section
5.3)
• Acquiring the EDID (see Section
5.4)
5.1 Connecting the VM-24HC 2 Input 1:4 HDMI Distributor
Figure 2: Connecting theVM-24HC 2 Input 1:4 HDMI Distributor
To connect
1
the VM-24HC as illustrated in the example in Figure 2:
1. Connect
2
the two HDMI sources, for example, a DVD player and a set
top box to the INPUT 1 and INPUT 2 connectors, respectively.
1 Switch off the power on each device before connecting it to your VM-24HC. After connecting your VM-24HC, switch on
its power and then switch on the power on each device
2 Using for example, the Kramer C-HM/HM/PRO