Owner manual

VM-24HC - Connecting the VM-24HC

4 Connecting the VM-24HC

Always switch off the power to each device before connecting it to your

VM-24HC. After connecting your VM-24HC, connect its power and

then switch on the power to each device.

To connect the VM-24HC as illustrated in the example in Figure 2:

1. Connect the two HDMI sources, for example, a DVD player and a set top

box to the INPUT 1 and INPUT 2 connectors, respectively.

2. Connect the HDMI OUTPUT connectors to up to 4 HDMI acceptors. In this

example, connect:

Not all outputs need be connected.

 OUTPUT 1 to display device 1 (for example, an LCD TV)

 OUTPUT 2 to display device 2 (for example, an LCD TV)

 OUTPUT 3 to display device 3 (for example, an LCD TV)

 OUTPUT 4 to display device 4 (for example, a plasma display)

3. If required, connect a PC and/or controller to the RS-232 port (see

Section 5.1).

4. Connect the power adapter to the device and to the mains electricity (not

shown in Figure 2).

5. If required, acquire the EDID (see Section 5.3).