Owner manual

10
VM-24HC - Using the VM-24HC 2 Input 1:4 HDMI Distributor
2. Press the EDID READ button.
When the LED stops flashing the EDID from Output 3 is stored at the input.
Pressing the EDID SELECT button briefly once causes the relevant LEDs to
indicate which EDID is stored at the input as follows:
 OUTPUT 1 LED flashes—the EDID from OUTPUT 1 was the last acquired
 OUTPUT 2 LED flashes—the EDID from OUTPUT 2 was the last acquired,
and so on
 All OUTPUT LEDs light—the default EDID was the last acquired
 All OUTPUT LEDs flash sequentially—the Auto-Mix EDID was the last
acquired