User Manual

Overview
5
5
3.2 About the Power Connect™ Feature
The Power Connect™ feature here means that only the transmitter needs to be
connected to a power source when the devices are within 90m (270ft) of each
other. The Power Connect™ feature applies as long as the cable can carry power
and the distance does not exceed 90m on standard CAT 5 cable. For longer
distances, heavier gauge cable should be used
1
.
!
Warning:
Using a TP cable that is incorrectly wired will
cause permanent damage to the device
3.3 Recommendations for Best Performance
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances and position your
VM-114H4C away from moisture, excessive sunlight and dust
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances