User guide

VM-100YC - Connecting the VM-100YC

4 Connecting the VM-100YC

Always switch off the power to each device before connecting it to your

VM-100YC. After connecting your VM-100YC, connect its power and

then switch on the power to each device.

To connect the VM-100YC as illustrated in the example in Figure 2:

1. Connect the s-Video source (for example, an s-Video player) to the INPUT

4-pin connector.

2. Connect the OUT 4-pin connectors to up to 10 s-Video acceptors (for

example, s-Video recorders).

3. If required, connect the LOOP 4-pin connector, when looping units and

release the TERM switch on first unit (selecting Hi-Z). Push in the TERM

switch on the second unit (selecting 75).

4. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in Figure 2).

5. Switch on the VM-100YC.

The s-Video source distributes to the s-Video acceptors.