Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VM-100CA
4
Table 1: Front Panel VM-100CA 1:10 Video Component / Audio Distributor Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
Table 2: Rear Panel VM-100CA 1:10 Video Component / Audio Distributor Features
# Feature Function
2 INPUT TERM Button
Pushing in selects 75; releasing selects Hi-Z
1
3 INPUT RCA Connector Connects to the digital audio source
4 LOOP RCA Connector For looping the input (if required)
5
S/PDIF
OUT RCA Connector Connects to the digital audio acceptor (from 1 to 10)
6 L-INPUT RCA Connector Connects to the stereo audio (left) source
7 R-INPUT RCA Connector Connects to the stereo audio (right) source
8 L-LOOP RCA Connector
9 R-LOOP RCA Connector
For looping the input (if required)
10 R-LEVEL Trimmer Adjusts
2
the right audio output level
11 L-LEVEL Trimmer Adjusts
2
the left audio output level
12 LEFT OUTPUT RCA Connector Connect to the stereo audio (left) acceptors (from 1 to 10)
13
ANALOG AUDIO
RIGHT OUTPUT RCA Connector Connect to the stereo audio (right) acceptors (from 1 to 10)
14 INPUT TERM Button
Pushing in selects 75; releasing selects Hi-Z
1
15 Y RCA Connector
16 R-Y RCA Connector For looping the inputs (if required)
17
LOOP
B-Y RCA Connector
18 Y RCA Connector
19 B-Y RCA Connector Connect to the component source
20
INPUT
R-Y RCA Connector
21 Y RCA Connector
22 R-Y RCA Connector Connect to the component acceptors (from 1 to 10)
23
COMPONENT VIDEO
OUTPUT
B-Y RCA Connector
24 Power Connector with Fuse AC connector enabling power supply to the unit
1 For looping select Hi-Z
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the level