User manual

TP-578H - Overview

Note: The TP-578H can supply power to PowerConnect devices but can only be

Warning:

Using a TP cable that is incorrectly wired may cause

permanent damage to the device

The TP-578H supports a range of:

 Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded

BC-DGKat524 cable

 Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded

BC-DGKat623 cable

 Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded

BC-DGKat7a23 cable

Note: The transmission range depends on the signal resolution, the graphics card

and the display used. The distance using non-Kramer CAT 6 and CAT 7a cables

may not reach these ranges.

3.1 Using TP cables

Kramer engineers have developed special twisted pair cables to best match our

digital twisted pair products; the Kramer BC-DGKat524 (CAT 5 24 AWG), the

Kramer BC-DGKat623 (CAT 6 23 AWG), and the Kramer BC-DGKat7a23 (CAT

7a 23 AWG) cables. These specially built cables significantly outperform regular

CAT 5/CAT 6/CAT 7a cables.

Note: The TP-578H cannot work with unshielded cables.