KR AMER ELECTRON ICS LT D.
Contents 1 Introduction 1 2 2.1 Getting Started Achieving the Best Performance 2 2 3 3.1 Overview Defining the SPK-W612 3 3 4 4.1 4.2 4.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual Use Kramer high performance high resolution cables i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
3 Overview The SPK-W612 includes a pair of high performance speakers that can be mounted on the wall vertically or horizontally. The mounting brackets are made of hardened steel that can be attached to each speaker, letting you rotate each speaker to the left or right. 3.
4 Installing the SPK-W612 This section explains how to: 4.1 • Choose the best location for your speakers (see Section 4.1) • Install the speaker wires (see Section 4.2) • Install the mounting brackets (see Section 4.
4. Unscrew the negative (black) screw-type connector, insert the wire from the negative terminal on the receiver, and retighten. 5. Unscrew the positive (red) screw-type connector, insert the wire from the positive terminal on the receiver, and retighten. 6. Insert the brackets (see Section 4.3) 4.3 Installing the Mounting Bracket To install the mounting brackets, as illustrated in Figure 2, do the following: 1. Insert the ballmount into the fixture (see Figure 2A). 2.
4.3.1 Installing the Mounting Bracket onto the Wall To install the bracket onto the wall, do the following: 1. Mark the location of the mounting holes. 2. Screw mounting screws (not included in the package) into the mounting holes. 3. Slide the mounting bracket over the mounting screws so that the mounting bracket is secured to the surface.
5 Technical Specifications FREQUENCY RESPONSE: 30Hz to 20kHz WOOFER: 6.5” (165mm) rubber surround TWEETER: 25mm polypropylene PASSIVE: 27mm piezo dome SENSITIVITY: 88dB (2.83V @1 meter) NOMINAL IMPEDANCE: 8Ω POWER HANDLING: 80Watts RMS to 120 Watts (IPP) Power handling is based on the amplifier volume never being set above the point of audible distortion DIMENSIONS: 19.3cm x 18.8cm x 25.98cm (7.6” x 7.4” x 10.23”), W, D, H WEIGHT: One speaker: 2.6kg (5.7lbs) approx.
8 SPK-W612 - Technical Specifications
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
