User manual

Installing the RTBUS-11 Round Table Connection Bus
7
7
5.2 Mounting the RTBUS-11 in the Table
To mount the unit, follow these steps:
Step 1: Insert the RTBUS-11
into the hole cut into the table
making sure the outer rim is firm
against the surface of the table.
Step 2: From underneath the
table, slide the mounting
brackets into the appropriate
slots.
Step 3: Tighten the butterfly
mounting screws securely
upward against the table.
Step 4: Lock the mounting
screws into position with the
locking butterfly screws.