User manual

Overview

3 Overview

The RTBUS-11 is an elegant furniture-mounted, round connection bus,

featuring a pneumatic mechanism for automatic lifting and smooth closing

of its lid. The RTBUS-11 is easily installed into a table or podium top for

the USA (Power Input - 110V AC). The RTBUS-11 enables you to connect

any equipment to systems installed in a room via cable access or passive

interfaces.

In addition, the RTBUS-11 includes the following pass-through connectors:

• 1 VGA on a 15-pin HD connector

• 1 HDMI connector

• 1 stereo audio on a 3.5mm connector

• 1 Ethernet port on an RJ-45 connector

• US power cord connected to the socket on the panel

The RTBUS-11 supports HDMI V.1.4 with Deep Color, x.v.Color™, Lip

Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD,

and CEC.

The RTBUS-11 surface is available in black anodized or brushed clear.

To achieve the best performance:

• Connect only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and

elevated noise levels (often associated with low quality cables)

• Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer RTBUS-11

away from moisture, excessive sunlight and dust