User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Install the Kramer RK-1UTB Under the Table Enclosure
6
Figure 3: RK-1UTB Under the Table Enclosure – Underside
5.2 Securing the RK-1UTB Enclosure to the Table
To install the RK-1UTB underneath the table, as illustrated in
Figure 4, do the
following:
1. Place the unit to the underside of the table and mark the correct location.
2. Insert the six M4.2X16 wood screws into the six rim screw holes (three
on each side) and fix the RK-1UTB to the table.
Figure 4: Securing the RK-1UTB to the Underneath of the Table