User manual

Overview

Table 1: Using the RK-1UTB

Mounting Kramer products

For example:

on the RK-1UTB

• One VP-100A unit

• Two 104B units

• One 104B unit

• One PS-1DVI unit

• One PT-1PS unit

• Four PS-1DVI units

The RK-1UTB does not have to be entirely full with mounted units. You can

use the optional blank panels defined in

Table 2 to fill the empty spaces.

Table 2: RK-1UTB Blank Panels – Part Numbers

Blank Panel Description

Part Number

PNL-BLANK/1/2U-19" 60-900013

PNL-BLANK/1/4U-19" 60-900014

PNL-BLANK/1/8U-19" 60-900015

3.1 Recommendations for Best Performance

We recommend that you:

• Have a Philips screwdriver available

• Disconnect the mains voltage and all cables connected to each machine that

is being mounted in the rack adapter before proceeding with the installation

• Connect only good quality connection cables, thus avoiding interference,

deterioration in signal quality due to poor matching, and elevated noise

levels (often associated with low quality cables)

• Avoid interference from neighboring electrical appliances and position

your rack adapter on the rack away from moisture, excessive sunlight and

dust

1 Each product is measured in inches