User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Mounting on the Kramer RK-1 Rack Adapter
6
5 Mounting on the Kramer RK-1 Rack Adapter
The RK-1 underside includes a set of screw holes that are suitable for any
combination of units to be mounted.
To mount the units on the RK-1, as illustrated in
Figure 1, do the following:
1. Place the first unit on the rack (for example, the Kramer PIP-4).
2. Hold both the PIP-4 and the RK-1 with your hands and turn them
upside down.
3. Insert and the appropriate amount of screws through the holes on the
RK-1 that fit the holes on the underside of the PIP-4, using the M3x5
screws supplied with the unit (as illustrated in
Figure 2).
4. Tighten the screws.
5. Rotate the RK-1 horizontally with the unit connected.
6. Place the next unit (for example, the Kramer PS-1DVI) next to the unit
that is already mounted.
7. Repeat steps 2 to 6 for each other unit.
Figure 2: RK-1 Rack Adapter – Underside