User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

The examples in Table 4 indicate how to install different products together

with blanks:

Table 4: Using the RK-1 with Blank Panels

Mounting Kramer Products with Blank Panels on the RK-1

For example:

• One PIP-4 unit

• One 1/2 19” blank panel

• One 1/4 19” blank panel

• One FC-31xl unit

• One PIP-4 unit

• One FC-31xl unit

• One 1/8 19” blank panel

• One PT-1PS unit

• One VM-50V unit

• One SHORT blank panel

• One LONG blank panel

• One VM-50V unit

• One SHORT blank panel

• One VM-50AN unit

3.2 Recommendations for Best Performance

We recommend that you:

• Have a Philips screwdriver and an Allen screwdriver available

• Disconnect the mains voltage and all cables connected to each machine that

is being mounted in the rack adapter before proceeding with the installation

• Connect only good quality connection cables, thus avoiding interference,

deterioration in signal quality due to poor matching, and elevated noise

levels (often associated with low quality cables)

• Avoid interference from neighboring electrical appliances and position your

rack adapter on the rack away from moisture, excessive sunlight and dust