User guide

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 1
4 Your Universal Room Controller 3
5 Using Your Universal Room Controller 7
5.1 Operating the RC-8RK 10
5.2 An Example of Operating the RC-8RK 11
5.3 Using the Macro Buttons 12
5.4 Using the Internal Web Page 12
6 Flash Memory Upgrade 13
6.1 Downloading from the Internet 13
6.2 Connecting the PC to the RS-232 Port 13
6.3 Upgrading Firmware 13
6.4 Installing the Web Applet 14
7 Technical Specifications 15
Figures
Figure 1: RC-8RK and RC-8RKL Front Panels 3
Figure 2: RC-8RK and the RC-8RKL Rear Panel 4
Figure 3: RC-8RK and the RC-8RKL Lower Rear Panel 5
Figure 4: RC-8RK and the RC-8RKL Upper Rear Panel 6
Figure 5: RC-8RK and the RC-8RKL Rear Side Panel 6
Figure 6: Example of a Typical RC-8RK / RC-8RKL Configuration 8
Figure 7: Example of a Typical RC-8RK Setup in the Lecture Auditorium 9
Figure 8: RC-8RK Labels Setup 10
Figure 9: RC-8RK Operation Example 11
Figure 10: Internal Web Page Front Panel 12
Figure 11: The KFR-Programmer Window 14
Tables
Table 1: RC-8RK and RC-8RKL Front Panel Features 3
Table 2: RC-8RK and the RC-8RKL Rear Panel Features 4
Table 3: RC-8RK and the RC-8RKL Lower Rear Panel Features 5
Table 4: RC-8RK and the RC-8RKL Upper Rear Panel Features 6
Table 5: RC-8RK and the RC-8RKL Rear Side Panel Features 6
Table 6: Connection Scheme (for the example in Figure 6) 8
Table 7: The Commands Configuration 10
Table 8: Technical Specifications of the Universal Room Controller Series 15