User guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your Universal Room Controller

5.3 Using the Macro Buttons

Pressing any button initiates a macro sequence

, during which the button

blinks (as programmed by the system integrator).

If during the macro sequence the button blinks faster than usual

, this

indicates that a malfunction has been detected

and the RC-8RK exits the

macro sequence.

To solve the problem, summon technical help

If you want to stop a macro sequence, press and hold that button for 5

seconds. The sequence will come to an end. You can resume operation by

pressing any of the buttons

. The unit will carry out the macro sequence

commands from the beginning.

5.4 Using the Internal Web Page

The internal Web page can be used to remotely operate the RC-8RK via the

Ethernet.

To control your RC-8RK via the internal Web page, do the following:

1. Type the unit’s IP number

in the Address bar of your browser (or type

any link defined by the system integrator).

The RC-8RK front panel is displayed on your screen (see Figure 10).

2. Press the on-screen buttons to control the unit.

Figure 10: Internal Web Page Front Panel

1 The macro sequence can be carried out instantly or can take a while, depending on the delay times included in the sequence

2 Six times per second, as compared with twice per second during normal operation

3 For example, a faulty DVD player

4 In this example, press the HELP DESK button

5 Including the button you kept pressed to stop the macro sequence

6 The default IP number is 192.168.1.39, and may be changed by the system integrator