User guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Universal Room Controller
10
5.1 Operating the RC-8RK
In the following example
1
that is illustrated in Figure 8, the RC-8RK is
labeled with specific functions and each button is programmed
2
to perform
several tasks
3
as defined in Table 7.
Each button may be assigned with up to 15 commands.
Table 7: The Commands Configuration
The
Label
The Macro Sequence
ON
 Power up the projector
 Power up the power amplifier
 Power up the DVD player
 Power up the video player
 Roll down the projector screen
 Turn on the speakers
 1 minute delay [for the projector to
heat up]
 Turn lights off
 The projector selects the PC input
OFF
 Turn lights on
 Power down the projector
 Power down the power amplifier
 Stop the DVD player
 Power down the DVD player
 Stop the video player
 Power down the video player
 Roll up the projector screen
 Turn off the speakers
DVD
 Stop the video player
 The projector selects the DVD
input
 Play the DVD
VCR
 Stop the DVD
 The projector selects the VCR
input
 Play the VCR
PC
 Stop the DVD
 Stop the VCR
 The projector selects a PC input
Vol UP
 Power amplifier volume up
Vol
DOWN
 Power amplifier volume down
ON
OFF
DVD
PC
VCR
Vol
UP
Vol
DOWN
HELP
DESK
Figure 8: RC-8RK Labels Setup
HELP
DESK
 Call for technical assistance
1 This is only one example among numerous possibilities, each button can be configured as required
2 By the technical installer
3 A macro sequence, including up to 15 commands per button, carried out one after the other