Owner manual

Using Your Media / Room Controller
9
The example in Figure 6 shows a rear view perspective of a typical
RC-7LCE configuration. It connects to the power amplifier directly, and to
the projector via RS-232, as well as to two relay items (a screen and a
lighting system). Each source—the PC, DVD and VCR—connects to the
dedicated video and audio inputs of the projector, and the projector connects
to the power amplifier:
Figure 6: RC-7LCE (Rear Perspective) Configuration
Figure 7 shows the RC-7LCE built into a podium in an auditorium with an
overhead projector and screen, speakers, lights, and a cabinet with a VCR, a
DVD and an amplifier inside, all controlled via the RC-7LCE. The
presenter’s laptop is located on the podium, next to the RC-7LCE. It is also
controlled by the RC-7LCE and is used for presentations and slide shows.