Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 2.2 2.3 3 4 4.1 4.2 4.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups1 that are clearly defined by function.
Getting Started 2.
Overview 3 Overview The RC-53DLC is an auxiliary remote control panel for Master Room Controllers1 for control of A/V equipment in a room.
Defining the RC-53DLC 4 Defining the RC-53DLC This section defines the RC-53DLC US (see Section ) and |European versions. 4.1 RC-53DLC for the US Figure 1 and Table 1 define the RC-53DLC front panel.
Defining the RC-53DLC Figure 2 and Table 2 define the RC-53DLC rear panel. Figure 2: RC-53DLC US Version – Rear Panel Table 2: RC-53DLC US Version – Rear Panel Features # Feature Function 1 Program USB Connector Connect to a computer for firmware upgrade1 2 Grounding Screw Connect to grounding wire (see Section 4.
Defining the RC-53DLC 4.2 RC-53DLC for Europe Figure 1 and Table 1 define the RC-53DLC front panel for the European version.
Defining the RC-53DLC Figure 2 and Table 2 define the RC-53DLC rear panel for the European version. Figure 4: RC-53DLC European Version– Rear Panel Table 4: RC-53DLC European Version – Rear Panel Features # Feature Function 1 1 Program USB Connector Connect to a computer for firmware upgrade 2 Grounding Screw Connect to grounding wire (see Section 4.
Defining the RC-53DLC 4.3 Grounding the RC-53DLC The grounding screw is used to earth the chassis of the unit to the building ground preventing static electricity from impacting the performance of the unit. Figure 5 and Table 5 define the grounding screw components. Table 5: Grounding Component Descriptions # Component Description 1 M3X6 screw 2 1/8" Toothed Lock Washer 3 M3 Ring Tongue Terminal Figure 5: Grounding Connection Components To ground the RC-53DLC: 1.
Using the RC-53DLC K-NET™ Auxiliary Control Panel 5 Using the RC-53DLC K-NET™ Auxiliary Control Panel The installation process is not detailed in this user manual.
Installing the RC-53DLC Faceplate, Button Caps and Labels 6 Installing the RC-53DLC Faceplate, Button Caps and Labels This section describes how to install the faceplate, button caps and labels. Figure 7 illustrates a sample button label sheet. Figure 7: Sample Button Label Sheet To install the faceplate, button caps and labels: 1. Remove the required labels from the supplied button label sheet. 2.
Installing the RC-53DLC Faceplate, Button Caps and Labels 4. Repeat for all six caps. 5. Retaining the orientation, place the six button caps on the buttons of the RC-53DLC. Figure 10: Placing the Button Cap 6. Remove the protective foils from both sides of the Perspex (acrylic glass) windows. 7. Remove the protective foils from both displays. 8. Place the faceplate on the RC-53DLC so that the four screw mounting holes are aligned. 9. Insert the four mounting screws and tighten with a screwdriver. 10.
Operating the RC-53DLC K-NET™ Auxiliary Control Panel 7 Operating the RC-53DLC K-NET™ Auxiliary Control Panel In the following example1 (illustrated in Figure 11), the auxiliary control panel is labeled with specific functions and each button is programmed2 to perform several tasks3 as defined in Table 6.
Technical Specifications 8 Technical Specifications Table 7 defines the technical specifications. Table 7: Technical Specifications1 of the RC-53DLC K-NET™ Auxiliary Control Panel PORTS: 2 K-NET on terminal block connectors; 1USB connector, 1 RS-232 on terminal block connector (factory use only) POWER SOURCE: 12V DC, 140mA over K-NET FUSE: 500mA, FSMD 1812 DIMENSIONS: For the USA: 11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49", W, D, H) For Europe: 15.2cm x 1.9cm x 8.6cm (5.98" x 0.75" x 3.
14 KRAMER: SIMPLE CREATIVE TECHNOLOGY
For the latest information on our products and a list of Kramer distributors, visit our Web site www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000752 Rev: 3 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
