Kramer Electronics, Ltd.
Contents Contents 1 2 3 4 5 Introduction Getting Started Overview Connecting a PS-1DVI DVI Power Supply Technical Specifications 1 1 1 3 4 Figures Figure 1: PS-1DVI DVI Power Supply Figure 2: Connecting the PS-1DVI DVI Power Supply 3 4 Tables Table 1: PS-1DVI DVI Power Supply Features Table 2: Technical Specifications of the PS-1DVI 3 4 i
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Overview The Kramer MultiTOOLS PS-1DVI DVI Power Supply: • Allows you to join two DVI-D or DVI-I signal cables even when the graphics card cannot supply the required power for the extension cables • Powers devices upstream via a copper DVI cable • Is compatible with either digital and/or analog signals • Utilizes DUAL LINK technology, enabling high frequency signals up to 3Gbps, and therefore the switching of resolutions higher than UXGA To achieve the best performance: • Connect only good quality connecti
Connecting a PS-1DVI DVI Power Supply Top Side Panel Top Side Panel Lower Side Panel Lower Side Panel Figure 1: PS-1DVI DVI Power Supply Table 1: PS-1DVI DVI Power Supply Features Feature DVI IN Connector Function Connect to the DVI source 2 5V DC +5V DC connector for powering the unit 3 DVI OUT Connector Connect to the DVI acceptor 4 POWER LED Illuminates when receiving power 1 4 # Connecting a PS-1DVI DVI Power Supply To connect the PS-1DVI, do the following: 1.
Technical Specifications Laptop Plasma Display 5V Power Supply Figure 2: Connecting the PS-1DVI DVI Power Supply 5 Technical Specifications Table 2 includes the technical specifications: 1 Table 2: Technical Specifications of the PS-1DVI INPUT: OUTPUT: POWER SOURCE: DIMENSIONS 2: WEIGHT: ACCESSORIES: 1 DVI, 1.2Vpp on a DVI-I Molex 24pin female connector; DDC signal 5Vpp (TTL) 1 DVI, 1.2Vpp on DVI-I Molex 24pin female connector; DDC signal 5Vpp (TTL) 5V DC 5.32cm x 4.36cm x 7.25cm (2.09" x 1.72" x 2.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
