user manual

Configuring and Controlling the VP-725xl
19
19
8 Configuring and Controlling the VP-725xl
This section describes how to configure and control the VP-725xl via the:
• OSD menu (see section
8.1)
• LCD display (see section
8.2)
• Infrared remote control transmitter (see section
8.3)
You can also control the VP-725xl via the Ethernet (see section
8.4)
8.1 Configuring the VP-725xl via the OSD MENU Screens
The OSD superimposes a menu on the screen from which you can configure
and control each input signal on your VP-725xl, using the MENU, ENTER, -,
+, UP and DOWN OSD buttons on the front panel and the remote transmitter.
To use the OSD menus:
1. Select the desired input signal.
2. Use the menu buttons as follows:
 Press the MENU front panel ON button or the MENU key on the
infrared remote control transmitter (see section
8.3) to display the
main MENU screen
1
, which displays eight interactive icons
2
(see
Figure 8)
 Press the MENU front panel OSD button or the MENU key on the
infrared remote control transmitter to move to the previous level in the
OSD screen (Esc)
 Press the + and – buttons to select menu icons and then press ENTER
 Use + and – buttons to increase and decrease the (numerical) rate,
respectively
Figure 8: MENU Items
1 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2) and a numerical range
2 The Audio menu is not applicable for the VP-725xl