user manual

Contents
iii
Figure 24: Atmel – Flip Window 39
Figure 25: Device Selection Window 40
Figure 26: Selecting the Device from the Selection Window 40
Figure 27: Loading the Hex 41
Figure 28: RS-232 Window 41
Figure 29: Atmel – Flip Window (Connected) 42
Figure 30: Atmel – Flip Window (Operation Completed) 42
Figure 31: The KFR-Programmer Window 44
Tables
Table 1: Terminology Used in this User Manual 7
Table 2: Front Panel VP-23RC Presentation Switcher / Controller Features 10
Table 3: Rear Panel VP-23RC Presentation Switcher / Controller Features 12
Table 4: VP-23RC Underside Panel Features 13
Table 5: CAT 5 PINOUT 18
Table 6: PROGRAM Dipswitch Settings 21
Table 7: Connecting an RS-232 Port to a PC 23
Table 8: Dipswitch Settings 24
Table 9: Connection Scheme (for the example in Figure 16) 30
Table 10: The Commands Configuration 32
Table 11: Technical Specifications of the VP-23RC Presentation Switcher / Controller 46
Table 12: VP-23RC Hex Table 47
Table 13: VP-23RC Master Audio Selector Hex Table 47
Table 14: Set the Audio Output Gain Control for the Groups 47
Table 15: Set the Audio Output Gain Control for the Microphone 47
Table 16: Set the Audio Output Gain Control for the Master Audio 48
Table 17: Increase or Decrease the Audio Output Gain by One Step 48
Table 18: Protocol Definitions 49
Table 19: Instruction Codes 50