user manual

Operating Your VP-23RC
35
Each pressed button illuminates
1
, indicating selection and outputting of that
video and audio source.
If a button includes a macro sequence, it will be executed when pressing that
button.
CV Video Acceptor
s-Video Sources




s-Video Acceptor

CV Video Sources
UXGA Sources
UXGA Acceptor
Speakers
Figure 20: Separate Switcher Mode
9.4.2 The Master Audio Mode
In the master audio mode, you can route an audio input signal from any of the
A/V switchers or from the microphone, to the MASTER OUT and/or SPKR
OUT outputs.
Figure 21 shows a plasma-display connected to the VP-23RC unit via the
UXGA OUT HD15F connector, and a pair of speakers connected to the SPKR
OUT terminal block connector (the Media/Room Controller connections are
not shown in this illustration).
If a button includes a macro sequence, it will be executed when pressing that
button.
1 Pressing an illuminated button for more than 2 seconds will disconnect the output and the button will no longer illuminate