User's Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
4
4 The RC Configuration Software
The Kramer RC Configuration 2 software lets you set a sequence of
commands (the macro) and assign them to any of the buttons on the RC
device.
The Kramer RC Configuration 2 software lets you:
 Create your own device drivers manually or via the IR learner feature
 Write, modify or delete commands
 Change the order of commands within the macro
 Set delay times between commands in a macro
 Set the button lighting and color
 Change text on the LCD displays on the RC units
 Save multiple sets of RC device configurations
 Read macros from the RC device
The RC buttons can be configured prior to installation
The following sections describe how to:
 Install the software (see section 4.1)
 Download the device drivers (see section 4.2)
 Create Serial and IR commands (see section 4.2.3)
 Map the ports (see section 4.3)
 Use the Kramer RC Configuration main window (see section 4.4)
 Write a macro (see section 4.4.1)
4.1 Installing the Software
Prior to using the Kramer RC Configuration 2 software, make sure that the
“.NET Framework” Revision 2.0 software is installed on your PC. If it is not,
you need to install it:
 If you have a fast Internet connection, this software is automatically
installed during the installation of the Kramer RC Configuration 2
software
 If you do not have a fast Internet connection, insert the CD-ROM into the
CD-ROM drive, double click the dotnetfx.exe
1
file and follow the
on-screen instructions
2
1 File names are liable to change
2 Installation may take about 15 minutes