User's Manual

The Kramer RC Configuration Menus
31
6.4.2 The Device Properties Dialog Box
To connect a device, open the Device menu and click Properties. The Device
Properties window Appears (see Figure 45). Figure 52 shows the Device
Properties window in the stand alone setup.
Table 10: Connect Dialog Box
Feature Function
Name, IP, Gateway,
Mask
If required, change information.
Model, Serial number,
Port, Firmware, K-Net-
ID, MAC,
Displays information.
DHCP
1
Enabled Check box to enable operation in
the DHCP mode.
When in the DHCP mode, you
can only change the name of the
device.
This process may take several
minutes and will cause an
automatic restart on the device.
Figure 45: Device Properties Window
6.5 The Help Menu
Figure 46 illustrates the Help menu and Table 11 defines it:
Table 11: Help Menu Features
Menu Command Function
Check for updates Search the Kramer
Electronics Web site for
software updates.
About Kramer RC
Configuration
Shows the current software
version.
Figure 46: The Help Menu
1 Dynamic Host Configuration Protocol: Allows the network administrator to distribute IP addresses from a central point and
automatically send a new IP address when an Ethernet point is plugged into a different network location