Kramer Electronics, Ltd.
Contents Contents 1 2 3 4 4.1 4.2 4.3 4.4 4.5 5 5.1 5.
ADDENDUM: WP-210, WP-210E, WP-210A, WP-210AE, WP-210AL, WP-220, WP-220E, and WP-230. This addendum clarifies the correct color of the V sync and H sync coax cables.
Introduction 1 Introduction Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 350-plus different models now appear in 8 Groups1, which are clearly defined by function.
Your WP-220E XGA/Audio/Video Line Driver 2 video outputs (an amplified and equalized RGBHV output on 5 BNC connectors, and a video output 2-pin connector that connects to the coax cable (one pin is for the composite video signal, and the other is for the Ground)) 2 unbalanced stereo audio inputs (a PC audio input on a 3.
Your WP-220E XGA/Audio/Video Line Driver 4.
Your WP-220E XGA/Audio/Video Line Driver 4.2 Your WP-220E Front Panel Figure 2 and Table 1 define the front panel of the WP-220E: Figure 2: WP-220E Front Panel Table 1: WP-220E Front Panel Features Feature RIGHT LEFT GAIN Trimmer IN RCA Connector GAIN Trimmer IN RCA Connector PC AUDIO IN 3.5mm Mini Jack Holes (2) ON LED XGA2 INPUT HD15F Connector EQ.3 Trimmer CV IN RCA Connector EQ.
Your WP-220E XGA/Audio/Video Line Driver 4.3 Your WP-220E Top Side Panel Figure 3 and Table 2 define the top side panel of the WP-220E: Figure 3: WP-220E Top Side Panel Table 2: WP-220E Top Side Panel 2 3 4 Feature Function BAL. LINE AUDIO OUT Terminal Block Connector BAL.
Using the WP-220E XGA/Audio/Video Line Driver 4.
Using the WP-220E XGA/Audio/Video Line Driver 5.1 Installing the WP-220E XGA/Audio/Video Line Driver To install your WP-220E XGA/Audio/Video Line Driver: 1. Connect the 5 BNC output connectors (each is color-coded: red (R), green (G), blue (B), yellow (Vertical Sync), and white (Horizontal Sync)) to the pre-installed wiring in the wall box opening that connects to the XGA acceptor (for example, a projector). 2.
Using the WP-220E XGA/Audio/Video Line Driver Alternatively, you can connect an XGA source to the Input HD15F connector, and a separate audio source to the AUDIO Input. 2. Connect a composite video source (for example, a VCR) to the CV IN RCA connector and connect the corresponding audio to the LINE AUDIO LEFT and RIGHT RCA connectors. 3.
Technical Specifications 6 Technical Specifications Table 4 includes the technical specifications: 1 Table 4: Technical Specifications of the WP-220E XGA/Audio/Video Line Driver INPUTS: VIDEO: 1 XGA analog red, green, blue signals: 0.7 Vpp/75 , H and V sync, TTL level, on an HD15F connector 1 composite video 1 Vpp/75 on an RCA connector AUDIO: 1 PC unbalanced stereo audio on a 3.5mm mini jack 1 unbalanced stereo line audio on RCA connectors OUTPUTS: VIDEO: 1 RGBHV on 5 BNC connectors 0.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user manual may be found at http://www.kramerelectronics.com/manuals.html. We welcome your questions, comments and feedback. Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
